Product Center
Contact Us
Mobile: Liu Fengxing13951151198
Telephone:0523-88301008
E-mail:1911306499@qq.com
Address: Jiangdu Town Industrial Concentration Zone, Jiangyan City, Jiangsu Province
SK type water ring vacuum pump
Before starting a chemical pump or vacuum pump, the suction pipe and the pump must be completely filled with liquid. After starting the pump, the impeller rotates at high speed, and the liquid inside rotates with the blades. Under the action of centrifugal force, the liquid is thrown outward from the impeller. In the diffuser chamber of the pump casing, the speed of the ejected liquid gradually slows down, and the pressure gradually increases. Then, the liquid flows out from the pump outlet and discharge pipe. At this time, a vacuum low-pressure zone without air or liquid is formed at the center of the blades because the liquid is thrown to the surroundings. Under the action of atmospheric pressure on the surface of the liquid pool, the liquid flows into the pump through the suction pipe. In this way, the liquid is continuously drawn from the liquid pool and continuously flows out from the discharge pipe.
Mobile:
Telephone:
Tel: Liu Fengxing13951151198 / 0523-88301008
E-mail:1911306499@qq.com
Address: Jiangdu Town Industrial Concentration Zone, Jiangyan City, Jiangsu Province
HUATAO GROUP
Leave a message online to get a free application solution
Copyright © 2025 Jiangsu Jiangjin Pump Industry Co., Ltd.
Business License